Dynasylan® Additives for the Foundry Industry
In the foundry industry Dynasylan® are used to achieve the following effects in moulds and cores that are produced using synthetic resins:
- Improvement in the initial and final strength
- Reduction in the amount of resin required
- Increase in the shelf life of the resin
- Reduction in sensitivity to ambient moisture
Our Top Products:
- Dynasylan® 40
- Dynasylan® A
The amount of silane employed is usually very low. A typical formulation for a synthetic-bound sand is given at left. The silane is always added to the resin.
A wide range of binder systems has been developed for the Dynasylan® - ideal for every resin system.
The choice of the right silane for a particular resin system is made on the basis of known structure/effect relationships and empirical testing.
To find out which products are recommended for different Foundry Resins processes such as
|
Croningprocess => |
|
Hot-Boxprocess => |
|
No-Bakeprocess => |
|
Cold-Boxprocess => |
|
Warm-Boxprocess => |
|
Ester curing process => |
|
SO2-process => | |
|
please visit our Product Finder and click on Foundry Resins in the left column. Clicking on the name of a product in the list of results will, after registration, open the product information sheet.
Imprint
